OSD Boards came to Xiamen on 06/02, here is the latest status of what got, (in short, boards are working except the Ethernet( yes, Ethernet again!!),

- Board boot to Linux and application was running.
- Composite Video in/out is working.
- S-video in is working.
- Audio in/out is working.
- USB host is working.
- SD/MMC/CF is working.
- Serial port is working.
- MSP430 part is working, able to get IR signal and timer ticks.
- Memory Stick not tested.
- IR blaster not tested.
- First 4MB Program Flash is working, however unable to access the second 4MB part, this should be SW issue. (Replaced with one single 8MB part, system works fine.)
- Unable to access Davicom Ethernet chip, power/clock/CS/CMD/Data interface were verified and seemed all normal, however SW was not able to write to/read from the chip itself. Extra delay between CMD and Data was addesd but didn't help. Tried to slow down DM320 clocked, didn't help either. We also tried to alter status of other pins (SD, A0 to A2 to connect to CMD
etc), didn't work.

More later, stay tuned...